To turn on the system press the Power button or select a source - Laptop or DVD. Press the Power button again to turn the system off.

Select either Source Vol or Mic Vol and then turn the Volume to adjust volume for the selection. You can also mute the source by pressing the Mute button. The buttons for Source Vol and Mic Vol light up based on which is currently selected to be adjusted via the volume knob.

To connect a laptop, use the provided HDMI connection and press the Laptop source button. The Laptop button will illuminate when it is selected.

Select the DVD source and then use the Blu-Ray/DVD Controls to control the Blu-Ray player. The DVD button will illuminate when it is selected.

Flip the On/Off switch to turn the wireless microphone on/off. The light will be green when the mic is on. The light will be off when the microphone is off. The wireless microphones feature rechargeable batteries and should be returned to the Charging Base when not in use. Only one microphone can be used at a time.

• All classrooms should be locked when you are done teaching unless there is a class immediately following yours.  If you aren't sure if a class is following yours please lock the classroom.
• Please turn off all projectors as soon as your class is done.
• Please turn off all lights in the classroom.
• Please turn off all microphone battery packs.

• Please contact the Communication Arts Instructional Media Center
• Phone:  608-263-6664
• Email:  imc@commarts.wisc.edu
• Support Hours:  8:00AM - 6:00PM Monday-Friday