Q-Sys system usage

What follows is general information on using the touch panels in newly remodeled classrooms.

This room contains an AV system with a large television, and multiple smaller screens around the room. Above the main screen is a camera for video conferencing. The room also has ceiling speakers and a microphone.

Using the TVs

To use the system tap "Touch to Begin" on the touch screen on the podium.

touch screen 1

To use the iMac at the teacher station tap iMac, or connect your own device by selecting one of the other available sources. There are two extra HDMI cables that are labeled with the name of the input.

touch screen 2

The smaller screens can be used independently of the main display. Plug your device in to the HDMI port below the TV you want to use and your device will replace what is being presented. You can also plug in your device to a smaller screen without having to turn on the main system. The connection will be detected and the screen will turn on for you.

small screen

Using the camera

To use the camera you must connect the USB-C cable to your device. In your conferencing software choose the room AV as your sources for microphone, speaker, and camera. The sources are named CR <room number> Room Devices.

screen 3

screen 4

 



Keywords:
q-sys av 
Doc ID:
147447
Owned by:
Sterling A. in School of Journalism & Mass Communication
Created:
2025-01-10
Updated:
2025-01-13
Sites:
School of Journalism & Mass Communication