[How-To] Use the TV in Conference Room 216G

General Set-Up (Required for Either Method):

• Power on the TV:
  • Locate the power button: look under the green box as imaged and press the power button to turn the TV on. You should see the TV screen turn on and display "PC HDMI 1 No Signal." 
  •  

Method 1 (Recommended): Directly with HDMI

• Ensure correct signal input:
  • If the screen does not display "PC HDMI 1 No Signal," select a different source by selecting "SOURCE" on the Samsung remotes, scrolling the options with the left and right arrows, and selecting the desired source, "PC," with the middle enter button.
  • 
• Connect your laptop:
  • Locate the HDMI cable on the conference table and plug it into your computer's HDMI port
  • 

• Now your laptop screen should also be displayed on the TV.

Method 2: Belkin Adapter

• Make sure that you have the DisplayDriver for the Belkin adapter installed on your device.
  • Refer to this link to install the driver
• Plug in the USB and HDMI cords from the table into the Belkin adapter.
• Plug in the USB-C from the belkin adapter into your laptop. 
  •  
• Now your laptop screen should also be displayed on the TV.

Disconnect:

To disconnect from the TV, simply unplug everything and turn the TV off using the remote or the power button on the TV.