Topics Map > Technical Support

Staff/Faculty/PhD Student/TA printing to B&W_Rm112_Copier - Mac

Staff, faculty or TA printing to B&W_Rm112_Copier

Please note: If you are computer is not part of the  WIRED Taylor Hall network, you will need to setup Campus VPN for Mac BEFORE doing the steps below.

  1. Download and install the drivers FIRST.
    B&W_Rm112_Copier (4MB)

  2. Go to Apple Menu-->System Preferences
  3. Select Printers & Scanners
  4. Click the "+" button to add a printer
    Add pinter
  5. If Advanced is in the menu, skip to Step #7.   Right-click in the grey area next to Windows and select Customize Toolbar.
    Right-click - Customize

  6. Drag-and-drop Advanced onto the Add dialog box toolbar. Close the Customize box.
    Drag and drop Advanced

  7. Select Advanced and use table to configure print queue information:
    settings for Rm112 Copier
  8. Search for the correct driver. See the table below for the model number to type in the search:
    Type:Windows printer via spoolss
    Device:Another device
    Name:B&W Rm112 Copier
    Location:Rm112 Taylor Hall (mail room)
    Use:SHARP MX-M266N PPD

    search for m266

  9. The settings dialog box may open after selecting the printer driver OR you may have to select the printer and click Options & Supplies-->Driver AFTER the printer has been added. See the table below for the settings:
    B&W_Rm112_CopierInput Tray Options: Two Trays
    Output Tray Options: Finisher
    Right Tray: Not Installed
    Hard Disk Drive: Installed

    options for Rm112 copier

  10. When printing to this printer for the first time, you will need to authenticate.
    Username: AD\<yourCampusNetID>
    Password:  <yourCampusNetIDpassword>

    authentication dialog box

See Also:

Keywords:printing;printers;staff;faculty;ta;copier;rm4112   Doc ID:81308
Owner:Eric D.Group:Agricultural & Applied Economics
Created:2018-03-30 16:04 CDTUpdated:2021-09-09 15:18 CDT
Sites:Agricultural & Applied Economics
Feedback:  0   0