Topics Map > Conference Rooms > Classrooms
Topics Map > Conference Rooms > Biochemistry Building (420 Henry Mall)
Conference Room B1144B
Projector and Screen
Projector
The projector is controlled by the panel located in the southeast corner of the room. To turn the projector on and lower the screen, press the “ON” button. Pressing the “OFF” button will turn the projector off and raise the screen.
Please make sure the projector is turned off when you are done.
Projector Screen
The screen will automatically lower when the projector is turned on and raise when the projector is turned off.
You can also manually raise/lower the screen using the up and down arrows on the control panel.
Please make sure the screen is up when you are done.
AppleTV (AirPlay) Instructions
AppleTV allows wireless connection from most Apple devices via AirPlay. Apple provides AirPlay instructions for the devices below.
Make sure the projector is ON and APPLE TV is selected on the control panel.
Device Name: BIOC-Rm B1144B-1500
You will be prompted to enter a 4-digit code to connect.
Once connected, you can adjust display resolution, screen mirroring or extended display, etc. as desired within your device's System Preferences/Settings.
HDMI 1 (HDMI and VGA Connections)
HDMI Connections
This connection is located at the desk in the southeast corner of the room near the projector control panel.
An HDMI cable is provided for use with the projector.
- Connect the HDMI cable to your laptop or device.
- Make sure the projector is ON and HDMI 1 is selected on the control panel.
Once connected you can adjust display resolution, screen mirroring or extended display, etc. as desired from the relevant System Preferences/Settings.
VGA Connections
There is a VGA to HDMI adapter attached to the HDMI cable located in the southeast corner of the room. To use this adapter, follow the instructions for HDMI 1 with the following additions:
- Connect the VGA and USB connections to your device.
- Connect the HDMI cable to the HDMI input on the VGA to HDMI Adapter.
Wall Plate (HDMI Connection in Back of Room)
This connection is located at the back of the room in the center of the west wall.
An HDMI cable is provided for use with the projector.
- Connect the HDMI cable to your laptop or device.
- Make sure the projector is ON and WALL PLATE is selected on the control panel.
Once connected you can adjust display resolution, screen mirroring or extended display, etc. as desired from the relevant System Preferences/Settings.
Speakers
The volume dial controls the volume of the audio playing through the speakers in the room. The speakers will play any audio provided by one of the inputs available in for the projector.
You can mute the audio by pressing the Audio Mute button. Press the button again to turn the sound back on.
Lighting Controls
There are two switches you can use to control the lights in the room. The switch near the entrance supports on/off. The switch in the southeast corner of the room also has dimmer capability. To adjust the brightness of the lights, slide the dimmer control up or down.
Need Additional Assistance?
If you need immediate assistance please try the following phone numbers:
Biochem IT – 608-265-4695
Biochemistry External Relations – 608-262-0622
BMC IT – 608-262-1184
Biochemistry Front Desk – 608-262-3040
To report an equipment issue or for other concerns, see Get Help from Biochemistry IT!.