• (Initial Check) Double-check the TV is plugged into the wall.
  • 

• Power on the TV:
  • Locate the small controller attached to the bottom of the TV screen.
  • 
  • Press the power button (the circular button in the middle of the controller with the power symbol).
  • 
  • You will hear a starting noise and see the tv turn on with a "No Signal" pop-up, as imaged below. This is normal. In the next step, we will connect the TV to your laptop.
  • 

• Connect your laptop:
  • Locate the dark silver Satechi adapter, usually on the small tray under the TV or on the conference table.
  • Plug each of the three cables from the cords under the table into its respective port, as imaged.
  • Plug the USB-C cord from the Satechi adaptor into your laptop's charging port/USB-C port.
  •     
  • If your haven't done so already, turn on your laptop, and you will quickly see your laptop screen now projected on the TV. 

• Ensure the volume works:
  • Make sure your volume is on for your laptop. 
  • Next, make sure the volume is on for the TV
    • Using the Samsung remote (usually located on the TV tray or the conference table), point the remote at the TV and increase the volume. You should see a blue bar to the left of the screen, indicating increasing/decreasing volume.
    •         

Now, everything should be working and you have successfully connected to Rm 250's AV. Yay!!

You can disconnect from the AV by:

1. Unplugging the USB-C cable from your laptop.
2. Locating the TV's small controller at the bottom right of it and pressing the center, circular power button.
3. You will see a menu pop-up. Use your fingers to scroll using that same controller, and select the power button by pressing the center, circular power button again. 
   1. 
4. You will hear a closing noise, indicating a successful power off!