Elvehjem L166 / L170 Quick Reference Guide
System Power
To turn on the system, do one of the following:
- Plug your laptop into the provided HDMI connection. The system will automatically power on and start projecting.
- Press the Power button or select a source - Laptop or DVD
- Press the Power button again to turn the system off.
Volume Control
Turn the Volume knob to adjust volume. You can also mute by pressing the Mute button.
Laptop
There are two ways to connect your laptop to the projection system:
- Wired: Connect your laptop to the provided HDMI cable.
- Wireless: If a laptop is not connected via HDMI and the Laptop source is selected, the wireless presentation device will instead be projected. You can wireless present via AirPlay (macOS) or by pressing Win + K (Windows).
You can also manually switch to the Wireless presentation method if a laptop is not connected via HDMI by pressing the Laptop source button. Once a laptop is connected via HDMI, the system will switch back to the Wired presentation method.
Blu-Ray/DVD
Select the DVD source and then use the Blu-Ray/DVD Controls to control the Blu-Ray player.
If the Blu-Ray player is not responsive, check to make sure it is powered on in the cabinet by the projector.
Need technical support?
Please contact the Communication Arts Instructional Media Center
Phone: 608-263-6664
Email: imc@commarts.wisc.edu
Support Hours: 8:00Am - 6:00PM Monday - Friday
Additional Notes:
- All classrooms should be locked when you are done teaching unless there is a class immediately following yours. If you aren't sure if a class is following yours please lock the classroom.
- Please turn off all projectors as soon as your class is done.
- Please turn off all lights in the classroom.
- Please turn off all microphone battery packs.