Packing the Tripod

• Collapse tripod to original position. Make sure to collapse the separator.
• Leave tripod arm loose.
• Make sure to put tripod head toward the top of the bag (the hard cap is the top).
• Zip the bag all of the way shut.

Tripod Features

1. Pan Lock
2. Pan Resistance
3. Tilt Lock
4. Tilt Fluid Drag

Setting Up the Tripod

1. Remove Tripod from bag
2. Ensure Tripod legs are slotted into separator
3. Loosen Tripod arm
4. Release rubber clips to allow spread
5. Spread legs to minimum width
6. Adjust height with top or bottom locks
   • 
   • 
7. Adjust width by loosening separator locks. Remember to tighten them once desired width is reached
   • 
8. Lock tripod arm in desired position
   • 
9. Level Tripod
   • 

Leveling the Tripod

1. Steady tripod head with hand
2. With other hand, loosen underside lock
3. Level according to air bubble
4. Lock underside

Securing the Camera

1. Assemble the Camera
2. Slide it forward onto the tripod. When the handle is on your right, the tripod is facing away from you.
3. Turn the knob on the right side of the camera 

Removing the Camera