MFA Dance - OBSBOT 4K Webcam Kit
Instructions for OBSBOT Tiny 2 4K Webcam Kit
Table of Contents
- OBSBOT 4K Webcam Key Features
- Webcam Includes
- Webcam Setup
- System Requirements
- Installing OBSBOT Center (Recommended)
- Basic Operation
- Camera Controls
- Video Settings
- Mounting Options
- Privacy Mode
- Firmware Updates
- Troubleshooting
- Shutting down Webcam
- Repacking Webcam
OBSBOT 4K Webcam Key Features:
- Compact 4K USB PTZ Webcam with 4x Zoom
- 1/1.5" CMOS, Dual-Native ISO
- Capture up to PixGain HDR 4K30
- Zone/Hand Voice/Gesture Tracking/Control
- Built-In Omnidirectional Mics, Tally LED
- Record & Stream with Computer, Desk Mode
- Dual Omnidirectional Microphones
- Fast USB-C 3.0 to Type-A Host Connection
- Noise Reduction
- Control with Free TinyCam Software
OBSBOT 4K Webcam includes:
1 x OBSBOT Tiny 2 AI-Powered PTZ 4K Webcam
1 x USB-C to USB-C 3.1 Gen 1 Cable
1 x USB-C to USB-A Adapter
1 x Magnetic Monitor Mount
1 x Carry Case
Setup
1. Mount the Camera
- Attach the magnetic mount to the top of your monitor or laptop.
- Place the webcam onto the magnetic mount.
- The camera will automatically align with the mount.
2. Connect the Camera
- Connect the supplied USB-C cable to the webcam.
- Plug the other end into a USB 3.0 port on your computer for the best performance.
- The camera will power on automatically.
Tip: If video is unstable or the camera repeatedly restarts, verify you are using a USB 3.0 port. USB 2.0 may not provide enough bandwidth or power for 4K operation.
System Requirements
Windows
- Windows 7 or later
macOS
- macOS 10.13 or later
Recommended for 4K or 1080p60:
- Intel Core i5 (7th Gen or newer)
- 8 GB RAM or higher
Install OBSBOT Center (Recommended)
Install OBSBOT Center to access:
- AI Tracking
- Image Settings
- Preset Camera Positions
- Gesture Controls
- Firmware Updates
- Camera Controls
Basic Operation
AI Tracking
Enable AI Tracking in OBSBOT Center.
The camera automatically pans and tilts to keep you centered while you move.
Gesture Controls
| Gesture | Function |
|---|---|
| ✋ Open Palm | Start/Stop AI Tracking |
| 👍 L Gesture (varies by firmware) | Adjust Zoom |
| Additional gestures | Available through OBSBOT Center settings |
Camera Controls
Using OBSBOT Center you can adjust:
- Resolution
- Frame Rate
- Exposure
- White Balance
- Brightness
- Contrast
- Saturation
- Sharpness
- HDR (if supported)
- Image Flip/Mirror
- Preset Camera Positions
Video Settings
Recommended Settings:
Video Calls
- Resolution: 1080p
- Frame Rate: 30 fps
- AI Tracking: On
Streaming
- Resolution: 1080p
- Frame Rate: 60 fps
- AI Tracking: On
Recording
- Resolution: 4K
- Frame Rate: 30 fps
- Manual Exposure Recommended
Mounting Options
The webcam can be mounted:
- On a monitor
- On a laptop
- On a tripod using the built-in 1/4"-20 thread
- On compatible mounting arms
Privacy Mode
To protect your privacy:
- Tilt the camera downward into Sleep Mode using OBSBOT Center or supported gesture controls.
- You can also disconnect the USB cable when not in use.
Firmware Updates
Periodically check for firmware updates in OBSBOT Center.
Updating firmware may improve:
- AI Tracking
- Camera performance
- Stability
- New features
Troubleshooting
Camera Not Detected
- Reconnect the USB cable.
- Try a different USB 3.0 port.
- Restart OBSBOT Center.
Choppy Video
- Confirm the camera is connected to USB 3.0.
- Close other applications using the webcam.
- Lower the recording resolution if needed.
AI Tracking Doesn't Work
- Enable AI Tracking in OBSBOT Center.
- Ensure your face is clearly visible.
- Improve room lighting.
Shutting Down Webcam
- Close any applications using the webcam.
- Place the camera into Sleep Mode or disconnect the USB cable.
Repacking the Webcam
- Please make sure to pack the webcam exactly how it was upon checkout.
- Please pack the camera with lens cap attached.
- This is very important for the long-term safety of the equipment.
- See photo for proper kit storage.
