Infoblox: Restart services

Certain changes within the Infoblox system require the underlying service daemons to be restarted, while most smaller changes will go into effect immediately. For DHCP, adding reserved addresses or fixed address entries will not require a service restart. Adding additional subnets/ranges for DHCP services and/or modifications to an existing subnet or range will require a restart.

After making a change that requires a service daemon restart, a yellow banner will appear at the top of the web interface.   

Click "Restart" on the upper left, and the following box will appear.  You can leave the default options listed in the box as shown below,  and click 
the "Restart" button in the lower right. 

- Restart Grid Services = "If needed"
- Restart Method = "Restart all Restart Groups"

The Infoblox system will take care of restarting the individual services across all the appliances where a restart is needed. 

Keywords:Infoblox: restart services   Doc ID:68182
Owner:Tim C.Group:DNS, DHCP, and IPAM
Created:2016-11-01 11:46 CDTUpdated:2020-08-04 11:12 CDT
Sites:DNS, DHCP, and IPAM, Network Services, Systems & Network Control Center
Feedback:  0   0