This procedure outlines changes that are required on Position due to movement from University Staff to Academic Staff/Limited as a Voluntary Reassignment. This procedure will ensure that the title, pay rate, and continuity are correct.
Navigate to: Workforce Administration > Job Information > Job Data.
Copy the Position Number.
Navigate to: Organizational Development > Position Management > Maintain Positions/Budgets > Add/Update Position Info.
Enter the Position Number and click Search.
Click the plus sign to insert a new row into the existing Position.
The Effective Date will default to today's date. Change the Effective Date to the date that the voluntary reassignment is effective. (Refer to the documentation for the Effective Date.)
In the Position Information section, click the Reason Code search prompt (magnifying glass icon) to search for and select 110 Voluntary Reassignment (AS/LI).
In the Job Information section, update the following:
Review the Reports To and Location fields in the Work Location section and update, if needed.
Go to the Specific Information tab and uncheck the Update Incumbents box.
Click Save. You may encounter soft warnings regarding a blank Reports To field, and incumbent data not updated unless box is checked; click OK on these warnings.
Go to the Budget and Incumbents tab and click the Job Data link.
To update Job Data, click the plus sign to insert a row. The effective date will default to today's date. Change the Effective Date to the date that the voluntary reassignment is effective. This is the same effective date that was used for the Position change.
Enter the Action and Reason - Position Change and Voluntary Reassignment AS/LI.
Update the Position Number field - this will update Job Data with the new position information.
Go to the Job Information tab and verify that the updated fields are correct. Note: Empl Class will likely come through as blank at this step, however, it will be populated once the entire process is complete.
Go to the Payroll tab and verify that the Pay Group is correct.
Go to the Compensation tab. Select the correct Rate Code populated based upon the employee's Pay Basis, reference HR - Comp Rate Frequency Overview .
Enter the Comp Rate.
Verify or edit the bottom Frequency.
Edit the top Frequency to M.
Click the Calculate Compensation button.
Verify the Compensation Rate (in the top Compensation section) is correct.
Go to the UW Custom tab and verify that the Continuity field updated correctly.
Update the Probation Type field.
Reset the Working Title field.
Enter the Work Schedule by navigating to: Time and Labor > Enroll Time Reporters > Assign Work Schedule.
Enter the Empl ID and Empl Record; click Search.
Add a row.
Enter the effective date of the voluntary reassignment.