Learn@UW/D2L - Possible Problem with Option to Automatically Keep Calculated Final Grades Updated

If you have set the option to "Automatically Keep Final Grades Updated" in your gradebook using the Points grading system, there is a slight chance that the calculated final grade will not update when grades are entered or changed.

This is a known issue.

If you experience this problem, change the grading system for the course from Points to Weighted, save and then back to Points:

  1. Go to the Grades tool.
  2. Select "Settings" by an icon resembling a gear ( gear ) near the upper right corner.
  3. Select the Calculation Options tabbed page.
  4. Select Weighted for the Grading system.
  5. Press Save.
  6. Select Points for the Grading system.
  7. Press Save again.

The final calculated grades should now update when grades are entered or changed.

See Also:

Keywords:brightspace learn@uw learnuw d2l desire2learn automatic keep calculate final grade grading update points weighted known issue system   Doc ID:5050
Owner:Rhianna C.Group:Learn@UW Utility
Created:2006-10-19 19:00 CDTUpdated:2020-01-30 14:03 CDT
Sites:DoIT Tech Store, Learn@UW Utility
Feedback:  1   1