Approving Room Reservations

How to approve a room reservation

To be able to approve the Room Reservation, you need to use the EMS Full Client web site. This site is restricted by license to only so many copies (Engineering has just a couple currently). I

Start the EMS Application

Go to the EMS Full client web site at http://webems.engr.wisc.edu/Login.aspx

You will need to login with an login/password that has been provided to you from the CoE EMS Administrator.

Check for pending reservations

Click on the Dashboard icon (may not always be green).




Click on the Web Reservations



In the Status area, make sure the Pending/Hold item is checked. To just show Pending/Hold items, make sure other status types are not checked.



In the Building section, make sure the (all) is selected. This will change the filter to show all the rooms in Engineering you are responsible for.



The main area of the window should now show if there are any pending reservation requests.

Approving a Reservation

Select a pending reservation from the list



Now click the "Go To" button to bring up the reservation:



You should now be viewing the Event Editing screen similar to the one shown below.



On this screen, there are various tabs to view additional information. The primary ones of interest are:

The Reservation Summary tab will show the entered contact information as well as a listing of the dates/times and rooms requested.
The User Defined Fields tab will show the additional information that the web form may have asked for (user entered comments, etc).
This History tab will show all the changes to the event that have been made since it was created.
The Bookings section will show all the date/times and rooms that were requested.

To approve the reservation request,
Click on the event in the left hand column so the very top entry is highlighted




Click on the "User Defined Fields" tab to view additional information about the event provided by the requester:


You can see the additional information provided, the example is shown below:



Now click on the "Reservation Summary" tab




We now want to change the status of the reservation. To do this, click on the Change Status button.



This will bring up the Change Booking Status window.



In the drop down list for the Status, select the Approved entry



Make sure the Update Reservation Status and Send Confirmation If Successful are  checked



Click the Next  button to continue:



This will bring up the entry with all the individual booking entries that we can change the status for. By default, all the entries will be selected. We just need to click on the Finish button to continue:



If none of the events were able to be approved, you will be presented with a dialog box. You will need to scroll over to see the reason that it wasn't able to be approved. To send out an email from the program in this case, Go back to the main Reservation entry, and on the "Reservation Summary" tab, use the "confirmation" button to send out an email confirmation where you can then tell the requester that their reservation was unable to be approved due to conflicts.

If the status change was successful and you checked the Send Confirmation Email earlier, you will start the wizard to send the confirmation email. This window should look something like:




The FIRST TIME you send a confirmation email from the system, there are a few things that need to be done. The system will remember the options you select for future email confirmations you send. In the future, you will just need to click the Email button. But for now, let's check to make sure everything is set up correctly. Start by clicking on the Buildings tab:



Make sure all the Buildings are selected by clicking on the > > button:



Now click on the Categories tab:



Again, make sure everything is selected by clicking on the > > button:



Now click on the Statuses tab:



Make sure all the Status types are selected by clicking on the > > button:



Now move to the next step by clicking on the Options tab:



Here, make sure the Confirmation Title has "Confirmation" in it:



Next, select General Conference Room Approved from the drop down list for the Header Message. You may need to scroll down the list to find it.



Now click the Email Options tab:



Here, make sure the General Conference Room Approved entry is selected in the Header Message. Again, you may need to scroll down the list to find it.



Make sure the Email Format is set to Summary:



Make sure the Attach Detailed Confirmation and Attach .ics File are selected, and the Prompt for Res. Attachments is not checked:



Now make sure the 1st Contact, 2nd Contact, Primary Contact, and Web User are checked for the Email To line.  This will generate an email message to the two contact emails the requester may have put in the request form as well as sending the requester (Web User) a copy as well.



Make sure the 1st Contact, 2nd Contact, Primary Contact and Web User are unchecked for the Email CC line. This way we avoid sending two messages to each person.



Now click the Email button to generate the email message



This will bring up the generated email message. An example is shown below:



At this point, you can make any changes you need. If you need to adjust who the email is sent to, you can do so in the area shown below:



If you need to update any of the text sent in the confirmation message, you can do so in the area circled below:



Once you are ready to send the confirmation email, click on the Send button



You have now approved the reservation request, and sent out a confirmation email.





Keywords:cae calendar ems approve web room reservation request schedule lab conference   Doc ID:21103
Owner:James D.Group:Computer-Aided Engineering
Created:2011-11-02 10:51 CDTUpdated:2016-02-16 11:33 CDT
Sites:Computer-Aided Engineering
Feedback:  1   0