The projector is controlled by the panel located in the northeast corner of the room. To turn the projector on and lower the screen, press the ON button. Pressing the OFF button will turn the projector off and raise the screen.
Please make sure the projector is turned off when you are done.
AppleTV (AirPlay)
AppleTV allows wireless connection from most Apple devices via AirPlay. Apple provides AirPlay instructions for the devices below.
MacOS iPhone, iPad, or iPod
Device Name: BIOC-Rm 1101-1600
- Make sure the projector is ON and APPLE TV is selected on the control panel.
- You can then initiate a connection to the AppleTV from your device using the instructions provided by Apple above
- You will be prompted to enter a 4-digit security code to ensure you are connecting to the correct device and prevent unauthorized connections.
Once connected, you can adjust display resolution, screen mirroring or extended display, etc. as desired within your device's System Preferences/Settings.
HDMI
This connection is located on the wall plate below the projector control panel.
An HDMI cable is provided for use with the projector.
- Connect the HDMI cable to your laptop or device.
- Make sure the projector is ON and HDMI 1 is selected on the control panel.
Once connected you can adjust display resolution, screen mirroring or extended display, etc. as desired from the relevant System Preferences/Settings.
There are two light switches near the entrance to the room. The left switch provides approximately 60% lighting. The right switch provides approximately 40% lighting.
Please make sure all lights are off when you leave the room.