Topics Map > Faculty Guide
Topics Map > IT
Topics Map > First Week

Russell Labs Hub - Faculty Guide - Copier Passwords

This document contains directions on how to enter your username and password into the Russell SHARP copiers.

There are three Sharp Copiers in Russell Labs. These are located in:
  • Two are located in Room 218,
  • One is located in Room 436 Herrling Lab

All of the copiers are now going to be username and password protected.

When you need to use the copier for copying or scanning, you will now need to enter a username and password.

The keyboard on the copiers can be found under the control panel, as shown in this image.

Sharp-MX_Keyboard.png

In the text field under Login Name: enter the appropriate NetID or Username.

The Username will be the NetID of Russell Lab Principle Investigators (PIs). For Department Instruction the Username will be one of the following:
  • fweteach
  • entoteach
  • ppteach

Under Password: enter the appropriate password.

The password can be obtained by speaking to the PI you report to or contacting help@russell.wisc.edu

You should now be able to copy/scan using the Sharp Color Copier.

Please remember to log out after you have finished using the copier.

Please make an appointment with Russell IT staff by emailing help@russell.wisc.edu if you want assistance with this new copier system.

Questions

Please see Laurie Ballentine, or John Slaybaugh if you have questions about the office copiers.



Keywords:russell lab hub administration faculty guide copier scan SHARP password netID   Doc ID:59870
Owner:John S.Group:Russell Labs Hub
Created:2016-01-19 16:46 CDTUpdated:2019-04-21 19:22 CDT
Sites:Russell Labs Hub
Feedback:  0   0