Wireless Printing for clinics
How to add the new wireless printers hosted on law-printserve
IMPORTANT: You must be on the LAW wireless network if you are in the building. For remote printing, you must be connected to VPN to connect to the printers. How to connect to the VPN instructions.
Note: you must be on the LAW wireless network for the following steps to work (you can stop down in the Tech Office - 2115 for access)
Step 1: Open any explorer window and type "\\law-printserve.ad.wisc.edu" (without quotes) in the address bar and hit enter.
Step 2: Choose to login as a different user and provide your NetID credentials. Be sure to check the remember my credentials checkbox!
Note: You MUST put AD\ before your username as shown in the picture
Step 3: Double click the desired printer. It is typical for the installation to take several minutes, and it may pause at points appearing frozen, but with patience, usually succeeds.
Note: Print jobs will print directly to the printer and do not need to be released at the release station. Jobs printed using this method will also come with a cover page with the users NetID printed on it.
|FJRC- HP Printer||WiFiFJRC|
|FJRC - Ricoh Copier||FJRC_Copier|
|EJI - Copier (Ricoh Machine)||EJI-WF-C|
Step 2: If advanced options are not there, add them by right-clicking (or control+click) on the gray area next to the icons near the top of the Add window and choose Customize Toolbar..., then drag the "Advanced" icon to the toolbar and click Done.
Step 3: Choose Windows printer via spools (or a similar option; may vary depending on OS version)
Step 4: after "smb://" add law-printserve.ad.wisc.edu/PRINTERNAME, where PRINTERNAME is the name of the printer as shown in the table above
For example, if adding the Remington Center printer it should look like this: smb://law-printserve.ad.wisc.edu/WiFiFJRC
Step 6: Select "Generic PCL driver" from the Use: dropdown list and click Add.