5145 Vilas Hall AV
The screen is controlled using the push buttons on the wall to the right of the TV.
Press ON to turn the display on, and OFF to turn it off.
Select HDMI or Wireless.
Volume is also controlled via the buttons.
Wireless Connection
No extra software is needed, but your device needs to be up to date. Before connecting make sure all software is current.
Apple Devices
Make sure your device is connected to the eduroam or UWNet wireless networks.
Click the Control Center icon in your menubar, or swipe down from the upper right corner of the screen on your iPhone or iPad, then click Screen Sharing
Select your room number from the list of choices.
Finally, enter the 4 digit code that appears on the room television.
To disconnect go back to the Screen Mirroring menu and click your room number again.
Troubleshooting
If no devices appear in the Screen Mirroring list make sure your device has Bluetooth turned on. Bluetooth is used to discover the wireless display devices.
If audio is not coming out of the display speakers make sure the volume is not too low or muted.
If audio is coming from your computer change the output by selecting Sound in Control Center, then select the display you are connected to.
Windows Devices
Make sure your device is connected to the eduroam or UWNet wireless networks.
Hold the Windows key and hit K, the Connect panel will slide out form the right of you screen. Click your room number and click Connect.
Type the four digit code that appears at the top of the room television and click Connect.
To Disconnect click Disconnect at the top center of your screen.
HDMI Connection
Press the HDMI button.
Connect one end of the HDMI cable to the wall plate below the screen, and the other end to your device.
Using the Logitech Meetup
To connect the Meetup to your device connect one end of the provided USB cable to the wall plate below the screen, and the other end to your device.
In your conferencing software set the following:
- Camera: Logitech Meetup
- Microphone: Logitech Meetup
- Speaker: Logitech Meetup
In macOS you will need to give your conferencing software permission to use the camera and microphone. Be sure to click OK when these messages pop up.
 |
 |
If you share your screen you will need to give the application Screen Recording permission. Connect to a meeting and select Share Screen.
| You will be prompted to Open System Preferences. |  |
 |
Toggle the button for your conferencing software to on. |
You then need to quit the software and relaunch it.