Tips for upgrading 10Meg connections
- Contact your local IT support to see if the device on the port can run at a higher speed and set the speed to 100Meg or 1Gig.
- Use EdgeConf and set the speed to 100Meg or 1Gig if the device on the port can run at 100Meg or 1Gig.
- Change wake on LAN settings to use 100Meg or 1Gig.
- Change power saving mode to use 100Meg or 1Gig.
- Get the cabling upgraded if the cabling is CAT3.
- Have the cabling checked if the device on the port is supposed to be able to 100Meg or 1Gig and it is connecting at 10Meg.
- Upgrade the NIC in the device connected to the port to 100Meg or 1Gig.