Discovery Printers: Windows Setup

This document describes how to set up the Print Queue on Windows. NOTE: We encourage you to set up the print queue twice, once with the black and white printing by default settings and once with normal color settings so that it's easier for you to print in color only what you need to be colorful.

Reminder on CORE Printing

  • Color: Color printing is very expensive. Use it sparingly and set your printer to default to black and white.
  • Occupants: The printers are for building occupants only. Friends, other students, etc. are not permitted to use the printers.
  • Research: Printers are for research-related materials only. Do not print non-research related items (e.g., school work).
  • Essential: Printing should be kept to a minimum. We work in a green building and resource conservation is important.
NOTE: If you haven't yet associated your WisCard with the printers, do that now following this guide: Discovery Printers: Register at the Printer
  1. Open File Explorer (My Documents)

    File Explorer

    In the address bar, type "\\" then hit enter

    Enter Address

    If your computer is not part of the domain, you will be asked to log in with your network username and password.

    Log in
  2. Double click on "Discovery B&W Print Queue"

    Double click
  3. The print queue will open. Close this window.

  4. Open "Control Panel"

    Click "View Devices and Printers" under "Hardware and Sound"

    Control Panel
  5. Right click on "Discovery B&W Print Queue on" and Select "Set as Default Printer"

    Set as Default

NOTE: The "Discovery B&W Print Queue" prints in black and white by default. To print in color, please repeat the process choosing Discovery Color Print Queue instead so that you have both queues set up.

If you are using a personal computer, you will also need to follow the steps below.

  1. Open file explorer and navigate to This PC/My Computer.

    File Exporer
  2. Click on the Computer tab and select Map Network Drive.

    Select Map Network Drive
  3. Enter \\\pcclient for the folder and make sure BOTH boxes are checked.

    Enter path
  4. Enter your username as morgridge\YOURUSERNAME and your password. Also make sure that the box is checked.

    Enter username
  5. This drive needs to be connected in order for the print system to see the correct username for your computer.

    If after restarting you are unable to print, open File Explorer and make sure that the drive is connected. If it is disconnected, simply try and open the drive and it will reconnect using the credentials you entered earlier in the setup.

Keywords:wid printing printers windows   Doc ID:66290
Owner:Drew G.Group:Discovery Building IT
Created:2016-08-19 10:05 CDTUpdated:2019-10-01 08:26 CDT
Sites:Discovery Building IT
Feedback:  6   0