College Library Media Studios (Rooms 2252A & 2252B) - Technology Overview

College Library Media Studio classroom technology overview and basic user guide. For assistance with this article, please contact the End User Computing (EUC) team or Mandy (mandy.morrow@wisc.edu)

All links on this page will open in a new tab.

Instructor Podiums/Computers

Each Media Studio classroom has one adjustable-height teaching podium with a Windows InfoLab computer and monitor that is available for use. View the software list on the InfoLabs computers. Please do not attempt to unplug or move this computer. 

Instructors/presenters may bring their own device to project, or check out a laptop from the College Library EUC Help Desk with their WisCard (if available).

Please do not move the instructor podium! It has no wheels and should not be moved except by library staff.

Projectors / Display Touch Panels

The adjustable-height instructor podium has a touch panel that controls the room's projectors. Each room has 2 ceiling-mounted projectors with pull-down screens. Projector 1 is always closest to the instructor podium, and Projector 2 is closest to the outside windows.

You can project from three sources in each room: Room PC (InfoLabs computer), HDMI Input** (for BYOD), and Wireless (Mersive Solstice app required). 

The HDMI cable for connecting your own device should be in the rubber cable holder on the tabletop or draped over the table. If it is on the ground, please pick it up to prevent damage. If you cannot find the HDMI cable, please ask the College Library EUC Help Desk for support. **Adapters for HDMI to other input options are also available for checkout at the College Library EUC Help Desk.

By default, the touch panel on the instructor podium controls only the projectors and speakers in the room in which it is located, and the system projects a single source to both room projectors. However, for classes/events that use both rooms together, you can combine rooms so a single touch panel controls all projectors, inputs, and speakers. 

Single Room Controls (Default)

Power on the Projector System

Touch the "Libraries" logo on the touch panel to turn on the projectors and start the system.

Basic Display Panel (aka Home Page / Source Routing Panel)

Below is an image of the main screen (home page) on the touch panel when you first power it on.

To display a source on both projectors (default setting), select the appropriate source button; it will turn blue and begin displaying the source.

To adjust the volume when using source audio through the room speakers, use the sliding scale at the top middle of the panel, or select "Speaker Mute" to the left of the sliding scale to mute the audio entirely. The "Speaker Mute" button will turn red when in use.

The "Projector Mute" button in the upper-left corner hides content displayed on the projectors without powering them off, making the screen appear black. The "Projector Mute" button will turn red when in use.

Advanced Routing Panel - For displaying a different source on each projector

To access the Advanced Routing panel, select the Settings icon in the bottom-right corner of the main screen (this will open the last settings page used). Select the "Advanced Routing" button in the bottom row, which will turn blue and display the panel pictured below.

From here, you can send any of the three room inputs to an individual projector. Select the input option on the left and then select the appropriate projector.

Note: Advanced routing has no default audio source for the room speakers; you must also send the desired audio source to the room speakers. 

To return to the main screen, select the "Home" button in the bottom right corner of the touch panel.

Projector Power Panel - Controls individual projector power

Note: This setting powers off only the projectors, not the whole system. 

The most common use case for this settings panel is when a presenter/instructor wants access to one of the whiteboards behind a pull-down projector screen.

To open this settings panel, select the Settings icon in the bottom-right corner of the main screen (this will open the last settings page used). Then select the "Projector Power" button in the bottom row, which will turn blue and display the panel pictured below. 

Select the "ON" or "OFF" button for the desired projector. (Remember, Projector 1 is closest to the podium and Projector 2 is closest to the outside windows!)

To return to the main screen, select the "Home" button in the bottom right corner of the touch panel.

Note: This panel should override the default of using both projectors when you return to the main screen and select a single source to display; however, if the projector turns back on, you should turn it off again and use the Advanced Routing Panel to send the source to only the projector that is powered on. 

Power off the Projector System - Please do this before leaving!

Select the round, red power button in the upper-right corner of the touch panel (it should appear on every screen). Then select "Yes."

This should turn off both projectors and reset the system to default settings. 

The touch panel should return to the Libraries logo.

Please do not use this option to power off when in the "Rooms Combined" setup. See the Return to Single Room / Separate Rooms instructions below.

 

Combined Rooms

Use this option only when both rooms are reserved for the same class/event. The steps below assume an individual room system is on and the touch panel displays the main/home screen.

Changing Projector System to Rooms Combined

From the main screen, select the Settings icon in the bottom-right corner (this will open the last settings page used). Then select the "Combine Rooms" button in the bottom panel, which will turn blue and display the panel pictured below.

The "Room A Only" or "Room B Only" button (depending on which room you are in) should be blue and selected by default. Select the "Rooms Combined" button; it will turn blue, and the other button will turn grey. 

This panel is now the main control for both rooms.

Note: Switching to Rooms Combined locks out the touch panel in the other Media Studio.

To return to the main screen, select the "Home" button in the bottom right corner of the touch panel.

Basic Display Panel (aka Home Page / Source Routing Panel) for Rooms Combined

Below is an image of the main page for the Rooms Combined setup on the touch panel.

To display a source on all projectors (default setting in Rooms Combined), select the appropriate source button, which will turn blue.

Note: When the rooms are combined, the Media Studio A buttons are lighter grey, and the Media Studio B buttons are darker grey to make them easier to distinguish at a quick glance. Media Studio A buttons will also be above Media Studio B buttons.

All main settings, including speaker mute and projector mute, work the same as in the Single Room setup above, except they now mute both rooms' speakers and all projectors.

Advanced Routing Panel for Rooms Combined - For displaying different sources (one or more) on each projector

To access the Advanced Routing Settings Page, select the Settings icon in the bottom-right corner of the main screen (this will open the last settings page used). Select the "Advanced Routing" option in the bottom row, which will turn blue and display the panel pictured below.

From here, you can send any of the three room sources in either room to an individual projector. Select the input option on the left and then select the appropriate projector. (Remember, the Projector 1s are closest to the podiums and Projector 2s are closest to the outside windows!)

Note: Advanced routing has no default audio source for the room speakers; you must manually send the desired audio source to the room speakers.

Even though the other touch panel is locked out, you may need to use the other room's sources (Room PC, HDMI, Wireless) if you wish to display a different source on each of the four projectors.

To return to the main screen, select the "Home" button in the bottom right corner of the touch panel.

Projector Power Panel for Rooms Combined - Controls individual projector power

Note: This setting powers off only the projectors, not the whole system. 

The most common use case for this settings panel is when a presenter/instructor wants access to one of the whiteboards behind a pull-down projector screen.

To open this settings panel, select the Settings icon in the bottom-right corner of the main screen (this will open the last settings page used). Then select the "Projector Power" button in the bottom row, which will turn blue and display the panel pictured below. 

Select the "ON" or "OFF" button for the desired projector. Media Studio A projectors are always on the left in this panel, and Media Studio B projectors are always on the right.

To return to the main screen, select the "Home" button in the bottom right corner of the touch panel.

Note: This setting should override the default setting of using all projectors when you return to the Rooms Combined main screen and select a single source to display; however, if one or more projectors turn back on, you should turn them off again using this screen and use the Rooms Combined Advanced Routing Panel to send the source only to the projectors that are powered on.

Separate Rooms / Return to Single Room - Will power down and reset both rooms to default

From the main screen, select the Settings icon in the bottom-right corner (this will open the last settings page used). Then select the "Combine Rooms" button in the bottom panel, which will turn blue and display the panel pictured below. 

As you can see, there is a red warning: "note: separating rooms will power down both rooms." -- Separating the rooms will power down both room systems and also reset both rooms to the default Single Room setup. 

Press the "Room A Only" or "Room B Only" button above that red warning (depending on which room you are in).

All of the projectors should power off, and the touch panels should return to the Libraries logo.

You should not use the "Power Off Projector System" steps above when "Rooms Combined" is selected. You can power off each room individually by following the "Power Off Projector System" steps for the single-room setup above, but you'll need to do the steps on each touch panel individually, starting with the panel where you set up Rooms Combined. Once you power off that first panel, the other panel will likely stay in the Rooms Combined setting until you power it off. We recommend these steps because separating the rooms resets both rooms from a single panel and saves you from walking to each panel or forgetting to reset the other room.

Audio Settings

Please be aware that the Media Studio speakers can be quite loud, and the collapsible glass wall between the rooms and other glass walls are not sound insulated. Before playing any audio, set the speaker volume on the touch panel to low, then increase it incrementally to a reasonable level. Also ensure your source audio* (Room PC or HDMI-connected device) volume controls are set to reasonable levels.

*We recommend projecting audio and video only from the Room PC or HDMI Input sources. Videos/audio on the Solstice Wireless display tend to lag or be choppy. 

Room Speakers

Both rooms have ceiling speakers that are controlled independently in the Single Room setup. In the Rooms Combined, the speakers in both rooms are controlled together.

With default single-source routing, the source audio automatically goes to the room speakers. In Advanced Routing, you must manually send the source audio to the room speakers because there is no default source.

To adjust the volume when using source audio through the room speakers, use the sliding scale at the top middle of the screen, or select "Speaker Mute" to the left of the scale to mute the audio entirely. The "Speaker Mute" button will turn red when in use.

Wireless Microphone

A wireless microphone is available for checkout from the College Library EUC Help Desk for use when the rooms are combined in order to amplify the presenter's voice, if desired.

Use the "Adjust Microphone" settings panel to adjust the volume with the slider and/or mute the microphone. The "Mute" button turns red when in use and grey when not.  

To access the "Adjust Microphone" settings panel from the main screen, select the Settings icon in the bottom-right corner (this will open the last settings page you used). Then select the "Adjust Microphone" button in the bottom panel, which will turn blue and display the panel pictured below.

(Note: This photo is slightly outdated and does not display the top panel correctly.)

AV Stack

Video and audio signals for each room run to a locked AV Stack in Media Studio 2252A near the collapsible wall on the same side of the room as the instructor podium. The AV Stack should not be moved or unplugged by anyone except trained library staff.



Keywords:
designlab projection display audio speakers projector solstice wireless display media studios 2252A 2252B
Doc ID:
114720
Owned by:
Mandy M. in Libraries
Created:
2021-11-08
Updated:
2026-11-16
Sites:
UW-Madison Libraries