College Library Media Studios (Rooms 2252A & 2252B) - Technology Troubleshooting

Below is a comprehensive guide for troubleshooting the Media Studio technology. Instructors and patrons using the Media Studios are encouraged to go to the EUC Help Desk in the main computer lab for support. For assistance with this article, please contact Mandy (mandy.morrow@wisc.edu). All links open in a new tab.

If the projector(s) will not turn on...

Please follow these steps to attempt to turn on the projector:

  • Try to turn on projectors using the advanced settings on the touch panel:
    • Touch the “Settings” symbol in the bottom right corner of the touch panel
    • Select the “Projector Power” button along the bottom row of the touch panel (turns blue when selected)
    • Press the “ON” button for the projector that is off
      • Note: In each room, Projector 1 is closest to the instructor podium, and Projector 2 is closest to the exterior windows; the projector # is also labeled on the physical projector.

  • Try shutting down and restarting the projection system. To do this:
    • Touch the red power button in the upper right corner of the touch panel
    • Select "Yes" to shut down
    • Once the touch panel returns to the start screen, tap the “Libraries” logo to turn on again

If these options do not work, please contact the EUC Help Desk in the main computer lab area.

If the Room PC is not displaying on the projector...

The Room PC is the desktop computer on the instructor podium. If "Room PC" is selected on the touch panel (the button should be blue instead of grey), but it is not displaying on the projector, please follow these steps:

  • Make sure the computer and monitor are both powered on. 
  • Make sure the display settings are set to mirror or extend displays. (See Microsoft Guide for multiple displays/monitors.) -- must be logged into the computer!
    • Note: The separate HDMI Input cable is sometimes erroneously connected to the Room PC. If the display settings show it is connected, please disconnect it; the computer can get confused with multiple display connections.

If the HDMI Input is not displaying on the projector...

Note: Each instructor podium has a rubber cable holder for the HDMI cable so it does not end up on the floor. Please put it in the cable holder when not in use.

  • Make sure the HDMI cable is properly connected to your device; it should be fully inserted and connected to the correct port.

  • If using an adapter, make sure it is connected properly as well.
  • Make sure the connected device is allowing shared display. Here are some guides for various operating systems.
     
  • If none of these steps work, restart the connected device and then try adjusting the display settings again. **Macs often need to be restarted to connect to new displays.

    If a device cannot connect to the Wireless display...

    • Make sure the IP address and passcode on the projector screen are entered correctly in the Solstice app on the device trying to connect.

    • Make sure the device has granted permissions to display wirelessly via the Solstice app (usually a security pop-up will ask to allow permission)

      • Mac OS - Go to Settings > Privacy & Security > Screen & System Audio Recording. If Mersive Solstice is on the list, make sure it's toggled on. If it is not on the list, click on the small + sign at the bottom left of the list and use the Finder window to find and select the Mersive Solstice app.
      • Windows - Go to Settings > Privacy & Security > Screenshots and Screen Recording. Ensure the toggle is on for Screenshots and Screen Recording. Under “Let apps take screenshots and record the screen,” make sure Mersive Solstice is in the list and toggled on. If it is not there, check “Recent Activity” (expand the content) for any recent requests. You may also need to go to Settings > Apps > Installed Apps and locate Mersive Solstice. Click on it and make sure any screen sharing and recording settings are enabled.

    • Try restarting the device you need to connect. **Commonly needed for Macs with new permissions/apps

    Audio Issues

    Note: We recommend projecting audio and video only from the Room PC or HDMI Input sources. Videos/audio on the Mersive Solstice Wireless display tends to lag and/or be choppy.

    Please be aware that the Media Studio speakers can be quite loud, and the collapsible glass wall between the rooms and other glass walls are not sound insulated. Before attempting to fix your audio issues, set the speaker volume on the touch panel to low. Also ensure your source audio (Room PC or HDMI-connected device) volume controls are set to reasonable levels.

    The steps below assume the device is projecting correctly, but the room speakers aren't playing audio:

    • Make sure the room speakers are not muted via the touch panel. The button is red when muted and grey when not.

    • Make sure the device is set to the correct audio output and the volume is up. (The name is usually "HDMI" or "External Device")

      • Room PC / Windows: Use the Windows menu to open Settings. Select Sound on the left side of the window. Under the "Choose your output device" drop-down menu, select the correct audio output. Then adjust the volume using the slider below.
      • Mac OS: Go to Settings > Sound. Under "Output," select the correct audio output. Under "Output volume," make sure the "Mute" checkbox is unchecked. Then adjust the output volume with the slider.

    • Go to Settings > Advanced Routing on the touch panel, select the input, then select "Room Speakers."

    • HDMI Input only: If the steps above don't work, unplug and re-plug the cable.

     



    Keywords:
    projection, display, audio, speakers, projector, solstice, wireless display, troubleshooting, EUC
    Doc ID:
    165482
    Owned by:
    Mandy M. in Libraries
    Created:
    2026-11-16
    Updated:
    2026-11-16
    Sites:
    UW-Madison Libraries