ECMS - How to configure PaperStream IP to use patch codes with the Perceptive Content Client

This document describes how to configure PaperStream IP to use patchcodes with the Perceptive Content Client

When configuring a scanner to use patch codes with Paperstream IP, perform the following steps to ensure all pages of the document are captured and the patch code is removed properly:

    1. Log in to the Perceptive Content Client with an account that can manage scanning profiles.
    2. Click Settings in the menu bar, and then click Options.
    3. In the left pane, click Capture, and then click Manage Profile List under Scanning Profiles.
    4. Click the desired scanning profile, and then click Modify.
    5. Click the Advanced tab, and then click Modify.
    6. Add the Image Processing actions in the following order, and then click OK.
        • Blank Page Detection
        • Border Removal
        • Patchcode Detection

          Note: For duplex scanning, enable these settings for both the
      Front
          and
      Back
        pages.

Duplex Settings

    1. Select the Display TWAIN property dialog at scan time check box, and then click OK.

Select TWAIN property dialog

    1. Scan a test document into Perceptive Content to generate the PaperStream IP (TWAIN) window.
    2. Click the arrows icon(Select TWAIN property dialog) to open the advanced settings window.


Display TWAIN property dialog

    1. Click Page in the left pane. Click Blank Page Detection to expand the options, and then click Off.


Page Settings

  1. Click Close to save the changes.

    Note: Clear the Display TWAIN property dialog at the scan time check box selected in step six to disable the TWAIN window popup after each scan.




Keywords:Imaging Perceptive Content Document Capture ecm ecms imagenow PaperStream IP patch patchcodes   Doc ID:81458
Owner:Craig S.Group:ECMS
Created:2018-04-06 08:16 CSTUpdated:2022-08-29 08:05 CST
Sites:DoIT Help Desk, ECMS
Feedback:  0   0